Quick Vehicle Finder
Find the right solution for your vehicle

Questions & Answers

no remote start

0 votes
2006 ford freestyle.  I have 2 keys.  Hard wired in.  The bcm i think is wrong for wire colors.  it looks like the wires are in the blue connector and the - disarm is a light blue wire.  could not find the light blue with black tracer. For disarm. plug in module goes to red let up insert first key to run position for 3 seconds. led lights on module turn red and yellow turn off remove key insert second key red light flashes 1 time remove key  press and hold red light flashes 1 time let up on button .press fob lock 3x and no led flashing 10x.   Any ideas would be great  I have the lastes firm ware and udates in.
asked Feb 18 in Ford by Byron Wilhoite (220 points)

1 Answer

0 votes

This vehicle is not listed for 3xlock . In order to monitor the oem remotes, it needs to be done via can-bus. There are no can-bus connections on this vehicle. Under Required Technology, it lists RF-KIT

https://fortin.ca/en/vehicles/ford/freestyle/2006-standard-key/

 

The connections for the doorlocks are to control the vehicles doorlocks from an aftermarket system (from the rf-kit).

 

You can still program the module though by either following the method for manual transmissions by jumping 12v to ignition temporarily instead of activating the rmeote starter, OR simply doing the 1 key programming method. 

 

answered Feb 18 by Robb (262,670 points)
...