hi, i worked on a 2016 mazda CX-3, AUTO transimission ,push to start.
i use EVO ALL+MYCAR mobile control.
flashed the EVO ALL with 71. firmware. STAND ALONE CONFIGURATION: D1,H2
connected all the wires. EXCEPT: parking lights(optional), hood pin
now I'm stucked at programing step 13. The vehicle's ignition turn ON, then nothing happened, The Yellow and Red LED’s will NOT come on. then ignition turns off.
when connect the EVO ALL back to computer, it says DCryptor: THE IMMOBILIZER DATA RECEIVED FROM THE MODULE IS INCOMPLETE.
i have tried 2 different EVO-ALL , same problem.