FAQ t-harness Question & Answers

Clear All

Search

Looking of our top participants?

See users

Couldn’t find what you were looking for?

Ask us a question

12/07/2023

FAQ Chris LaMonica (130Pts.)

Datalink Protocols Disabled

I know this question has been asked but seen no official answer on it. I was trying to enable D2D (F3) in Datalink Protocols and couldn't as they are greyed out. Can't turn them on or off. I'm using the recommended firmware for my 2021 Jeep Cherokee PTS with evo-all firmware 68.03.

30/03/2023

FAQ Robert Marcin (130Pts.)

Pathfinder '22 EvoALL wont start,lock,unlock

Hi, I installed Evo ALL on Pathfinder 2022 using TNIS7 harness and Crimestopper rf kit. Installation was straight forward, programming was easy as well. When I try to start car it will not. Using factory fob, car receives CAN signals (blue led blinks) and dashboard lights up. Using rfkit remote, lock unlock dont work (only lights flash, door will not lock unlock). When try to start car using rf kit remote, first it locks door, dash turns on and thats all. Evo sends CAN signals(blue) and recognize Ignition (yellow). When I programed module I turned bypass hood switch on in options and picked Crimestopper rfkit (but this should not matter because 3xLock doesnt work either). I used firmware 92.05 (instructions states to use 92.04) s/n: 001A07019830 Any advice, what am I doing wrong? Thank you in advance.

evo-all

t-harness

no-remote-start

remote-start-not-working

remote-unlock

pathfinder

3x-remote-start

11/03/2021

FAQ David Gates (160Pts.)

2009 GMC Sierra Manual Door Locks....Can you turn of the unlock detect on an Evo-All?

I installed the GMT4 in my GMC Sierra that has manual door locks. The truck shuts off when the key is inserted into the ignition because there is no unlock pulse. Can I turn of that feature on this system? I also have the RFK411 installed with the evo all.

02/02/2021

FAQ Jimmy Inta (160Pts.)

Where is the "Supported RF Kits" tab?

I am trying to add a Viper RF kit to an EVO-ONE, but there is no tab on Flashlink (Firmware: 4.05). To my understanding, Fortin defaults to Fortin RF kits, but how I do change this to support another RF kit?

25/04/2020

FAQ Cam Cross (1070Pts.)

Flash Limit reached

I just bought an evo-all with a GMt1 T-Harness. Upon connecting it to my computer, I get an error saying flash limit reached 0/0. The Service Number is 001A06 242453. Can this be reset?

06/01/2020

FAQ Ed Andre (380Pts.)

Is anyone using an EVO-ALL with the RFK912 kit succesfully ?

I have two cars with the EVO-ALL and the RFK912 and they both stop responding to the remotes about a day after they're been configured. Reconfiguring gets it work again, but then they stop again. My other car with a RF942 works great wih the EVO-ONE. Do I need an EVO ONE for these ??

19/12/2019

FAQ BrandNew (160Pts.)

Radio shuts off and doors unlock as soon as car is shut off

After I remote start the car, drive to my destination, and then shut off with the push button, the radio immeadtely powers off and the doors unlock. Before I installed the Evo-one, the doors would remain locked and the radio would remain powered until one of the doors were opened. Is there a setting I can adjust to change it back? I have a 2012 Audi A4 with push to start with Evo-One and T-harness.