Français
My account Register
Français
EVO-START Wirecolor

Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

ESTIMATED TOTAL:

Checkout

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

Clear All
Collapse All
Expand All
Clear All
Collapse All
Expand All
picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question
RÉCENT HOT! MOST VOTES MOST ANSWERS MOST VIEWS

10/04/2021

 Infiniti Luis Sanchez2 (950Pts.)

0

Q40 Parking lights turn on intermittently on remote start

I have the EVO-ALL with the T-harness installed on my Infiniti Q40 and G37S Coupe. The options are set identically. On the G37, when I remote start, my parking lights always turn on when I remote start the car. This is not always true on my Q40. More times than not, the parking lights do not come on at all. Option A14 is currently off on both vehicles. I tried turning this option on on the Q40 but there is no change on how (when) it works. The only real difference between the two is the type of RF kit I have installed. Any help will be greatly appreciated. Edit: Lights come on every time I remote start the car in the garage. Not when I start it outside the garage and it's sunny and bright. Lights switch is set to off for each of the tests.
Login to reply View 1 answer(s)

07/11/2020

 Infiniti Nabeel Munir (130Pts.)

0

2008 infiniti g37s coupe push start automatic transmission from us in miles

Hi guys I got the Fortin Evo-NIST1 with T-Harness and followed guide 80851 for auto transmission. I got all the wires mentioned connected. Brown wire from t harness to red wire by driver kick panel and the whiteblk to push start brown wire, at the bcm I got the two wires in the pin and tapped the 2nd wire which is red for me in the bcm. The bcm pin wire for (-) door pin is red color wire for me. The programming went smooth but The car doesn't start. When diagnosting I touch the dkblue wire to ground the break lights up and the module has red light. Three times lock the module blinks blue and that's all. Three times lock button module blinks blue everytime but the car does not start. The module does not have any lights after the blue blinks. Please help.
Login to reply View 1 answer(s)

13/03/2019

 Infiniti herbie yang (160Pts.)

0

Evo-one install on infiniti 2008 G37 6 speed manual but only lock and unlock work. Remote start does not work.

Hi, I’m installing EVO-one with Omega LINKR-TL2 on a 2008 Infiniti G37 6 speed push to start. I follow the installing guide #33251. I flashed the unit up to the latest firmware. Previously I had a DEI XL202 romote start that connected to EVO one. Tested the unit and only lock and unlock working but when attempt to remote start the car. Only see 3 parking light flash. So I though that it could be DEI XL202 is not functioning correctly so replace it with Omega LINKR-TL2 unit but still have the same result. I have been talking to Derek for his assistant and suggested to master reset both the bypass and remote start. Reset the module and reprogram with his suggested selection (BYPASS SIDE: A1-A11 -ON, C1 -ON, REMOTE SIDE: 8.2, 32.2, 33.3 AND 38.2) but have the same result. I’ve been doing a lot of online researching for the passed 2 week but still no luck. (Now only lock and unlock working) Your help will be much appreciated.
Login to reply View 1 answer(s)

27/02/2017

 Infiniti James Terry (190Pts.)

0

Starter Over Cranking Evo-One with harness 2008 Infiniti QX56 with intelli-key

when remote starting the starter is over cranking. It is wired to the can bus and programmed to tachless/data link but it still over cranks.
Login to reply View 1 answer(s)

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue