Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

0

2016 Kia Soul. Remote start isn't engaging. Fortin Evo One

Having problems with the Evo One not kicking the remote starter on. Programming was did right Im assuming, the can connections are correct assuming becuase i was getting the flashing blue led and such when programming. I do not have the EMS wire so i did use option 2 in the installation diagram. Hit the oem remote 3 times but nothing. Not sure what needs to be checked in the firmware updater though. Kinda stumped and help would be appreciated.

0

vehicle does not remote start.

I installed evo all in Kia Sorento SXL but after pressing 3 time to remote start, The red light come on on the Evo all, the door on lock, the welcome screen on the instrument cluster come up and the off but the vehicle does not start.

0

EVO-ONE programs but will not start remote start on 2012 Optima PTS.

Unit firmware was updated with Flash-Link for 2012 KIA Optima 2012 PTS and recommended options were selected and save. Programmed correctly but will not remote start. The module flashes Blue LED for each press of the lock button on OEM remote, Red LED comes on then goes out, the door lock opens and then locks with another flash of the Blue LED. Engine does not crank. I checked all the wire connections for continuity with multi meter and verified the connections per the installation guide # 46311.

0

2017 Kia Sedona PTS EVO-ONE: 3x lock starter issue

Video of Issue

 

I'm having an issue with my 3x lock remote start function after installation on my 2017 Kia Sedona Push-to-Start.  It attempts to start, but the starter keeping trying to turn for about 8 seconds straight, doesn't start successfully, and then the parking lights flash 3 times.  The car then locks, waits about 5 seconds, and goes through the same sequence a second time and gives the same 3x flashes on parking lights.

 

I don't know if the 3x parking light flashing error is considered before start or after start in this case, as they mean two different things.

 

Any idea what the issue is?  It almost sounds like the car's trying to start but either the spark plugs or the fuel line isn't feeding, which I'm guessing means that the immobilizer is still enabled.  I checked all the wire connections and they are good, so I'm not sure what the issue is.

 

Details

Firmware: 76.39

C1 Status: Enabled

38.2 Status: Enabled

EVO-ONE Yellow Wire: Cut

Remote: OEM

Car Model: 2017 Kia Sedona PTS

Parking Light Error: 3x flashes after attempted start

Vehicle Miles: 3,500 (it's a new car)

Transmission: Automatic

 

Any help would be great, thanks!

0

Issue programming crimestopper revo 1.1 to evo-one - 2016 KIA Soul

Everything else on the installation has gone fine per the instructions for programming the EVO ONE module. However, the module will not change from the YELLOW LED when turning the key to the ON position when trying to program the Crimestopper REVO remotes. I do see that others mentioned that they downgraded the firmware to 1.16, but those posts are two years old at this time... Is this still necessary? It also seems that, the OEM key buttons will not work once the car is remote started?? I thought the purpose of buying the additional RF kit was to have the OEM keys work to unlock the vehicle remotely, after the car has been started remotely?? Any help would be greatly appreciated.

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue