Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

26/10/2023

Kia jfehr (130Pts.)

0

Tach sensor 2009 Kia Spectra

2009 Kia Spectra. THAR-ONE-KHY1. I need to know which wire to connect the tach signal to. Yes, in the Wire Colour diagram it does tell me which wire on the ECM, but no-where can I find which wire on the EVO-one it must be connected to. I have by-passed it currently using programmable option 20.2, but the start quality is pathetic; in cold temperatures it requires more crank time, causing excessive starter drag in warmer conditions. Adjust for warm temperatures and the crank is in-sufficient for the cold mornings. Advice for me?

0

Does EVO-ONE Support Kia's New Anti-Theft Update

Hey guys,

So Kia has released a new firmware update for their cars in order to deal with the rise in car thefts. The update is applied at the dealership. I've been thinking about getting the update, but I need to make sure my Evo-One will still remote start the engine after the changes are made.

I have a 2020 Kia Forte with a push-button fob. From what I've gathered, after the update, the BMS must receive the unlock command from the KeyFob in order for the engine to start. If the car isn't unlocked and I were to try to start it, it would end up panicing for 60 seconds.

I know the EVO-One already unlocks the doors over CanBus, but does it support the update Kia is applying to our cars? Will it still remote start the car after changes are made?

 

https://www.nhtsa.gov/press-releases/hyundai-kia-campaign-prevent-vehicle-theft

0

Problem with EVO-ONE

Problem with EVO-ONE Hello everyone I buy and connect my evo-one this instruction and programming But i have some problems and questions with this product. I used this instruction https://fortin.ca/en/download/24051/24051.pdf 1. On Flashlink manager show recommended firmware 76.31 but on pdf instruction 76.60 (only works 76.31 on 76.60 not programming) 2. On my car i select diesel mode and 6 minutes running but only work 4 minutes 3. Diesel mode function 18, Delay between ignition power up and starter mode not working. ( Work without delay ) 4. My big problem. When the remote started after 4 minutes engine shut down and open my car trunk. Car: Kia Sorento 2011 Push to Start Diesel Firmware version: 76.31 and 1.26 Evo One Serial number: 002B04 138126Problem with EVO-ONE

0

Aftet shutdown engine evo one open car trunk

Kia Sorento 2011 pus to star diesel i connect all from instruction everything is ok but after shutdown engine evo one open my can trunk

0

TPMS light on when remote started.

My 2020 sportage has the Tpms light on when remote starting. Is there a way to prevent this?

0

Is this product compatible with Kia Sportage 2017 key start

I have Kia Sportage 2017, a Korean made in Slovakia, is this product compatible with my car

0

Do I need a to update my new EVO-ONE ..

I just purchased an EVO-ONE for my Kia Sedona 2014 (S/N: 002B04246972) and doesn’t have a bar code stamped on the back label just a Qcode and a "Secure Update" label. Q: Do I still need to use the "Flash-Link Updater" to update or reprogrammed my module? If yes, is my module compatible with”Flash-Link updater"? BTW, I got my EVO-ONE from plugnplaykits.com Many Thanks,

0

arrêt du moteur a 15 secondes

Sorento 2019 push button, evo-one avec t arness, le moteur arrete apres 15 sec du demarage avec la clef (3fois lock) avez-vous un idée? Merci

0

Car cranks but won’t start

Hello so I have a fortin remote start on my kia optima sx 2015 that already came installed with the car when I bought it. Now last week I changed my car battery and after doing so I started getting an issue with my remote start when I start it, the car will start cranking but not start. It does 2 attempts at starting but never ends up doing so, just cranks and then shuts down. Any help would be appreciated! (Keep in mind I know nothing about remote starters so)

0

Lumière du parking flash 3 fois

J'ai changé ma batterie récemment , il fallait que je reprogramme le démarreur . La ça fonctionne pas et les lumières clignotent 3 fois , j'utilise la manette pour ouvrir et fermer les portes seulement. c'est un kia Manuel 2015 . Avez vous une idée comment je peux résoudre ce problème. merci

0

Compatibilité transmission manuelle

Est-ce que le système evo-one est compatible avec une Rio 2013 push start à transmission manuelle?

0

2020 kia optima key to start, no vehicle info for this car.

I have a kia optima 2020 key to start. Theres nothing for this vehicle....... only push to start and mine is key to start.

0

How do I get this to work when it is cold outside?

This is the second winter since the product was installed. Now it will not remote start on cold mornings. Starts fine during the day.

0

Activation Key not allowing entry

I used the activation key to make sure all was available and working for when the tech I hired would do the install. He is coming today. I went to open with the key and was told the key was single use and I was denied entry. This was not made clear to me. I would like the key to work so the tech I hired to install the product will have access to the information today. Robert Kelley

0

What connection do I make to the pink starter wire with EVO-ALL module only. ie. No data link.

What connection do I make to the pink starter wire with EVO-ALL module only if I am not using a data link kit. 2016 Kia Sorento Push to Start

0

2020 Telluride- Remote start not working and horn honks 3 times after locking

I installed an EVO-One in my 2020 Telluride. I am using the RM912 and ANT900 kit. I updated firmware on the antenna and the EVO module. All wires seem to be correct per drawing. I was able to program the bypass when you first hook up all connectors, and I got the two remotes programmed to the antenna, however the manual says to hold the single button for 12 seconds or until the blue LED turns off and then comes on SOLID. The Blue LED comes back on RED for me. The manual does not specify what color it should be when it comes back on solid, but maybe red is a bad sign? I try to use to 912 fobs and nothing happens. No lights on the EVO or antenna. The fobs blink blue and then turn red and chime a few times. I can use the factory Kia fob to lock/unlock and the blue LED on the EVO blinks when doing this. The yellow light on the EVO is constantly on when the car is running or ignition on. I never see any other lights blinking on the EVO though. The Antenna LED will blink very fast right after locking the door with the factory fob. In about 10 seconds or so, the horn and park lights flash 3 times and the blue LED on the antenna then blinks slower. It is programmed as a push to start automatic car, so I am not sure what 3 honks really means. The car still stays locked. No matter what I try with the two RM912 remotes, they never get a green light, the antenna or EVO mdule never blinks blue when the 912 fob is used, and nothing ever happens with door locks or starter. Almost seems liek the fobs do not work at all, but to try and test that theory, I set the ability to remote start the car using the factory fob with 3x lock button, but that does not work either. I have the yellow loop cut, the hood is closed (grounded) and doors are all closed. I am wondering what to do?

22/10/2019

Kia Alex Za (220Pts.)

0

What options to activate to have ground impulse on AUX1

Kia Sedona with OEM remote start. What options should be activated to have 1 short ground impulse on AUX1.

0

EVO ALL CAN Bus confusion

Good evening, I am wiring up an EVO All with a Viper 4706V on a 2015 KIA Sorento. I am confused on the CAN1 and CAN 2 locations. According to guide 10841, CAN1 is located on the back of the fuse box, and CAN2 is located on the ODB-II connector. Yet, WIRECOLOR.com shows the opposite. And looking at the standard pinouts for ODB-II, it just shows can bus high and low on the ODB-II, no 1 or 2 spec. Anybody out there do one of these installs? Not sure which doc to trust here... Thanks, Jim

18/10/2019

Kia Alex Za (220Pts.)

0

OEM remote range during RS operation is drastically low

KIA Sedona 2016 Evo One with 3xlock start with OEM key fob Evo One causes some RF interference in the system for OEM key fobs when RS is operating. I can start the car from a distance of probably 300 feet, but if i want to shut it of, it does not deliver the signal unless I come at least 30 feet to the car. Any Idea what option in EVO One can cause such an interference?

0

Alarm works when door is opened

1-OEM Alarm goes off when I unlock and open the door in kia sportag 2015 Standard key, EVO One.

 

2- Lighting around the key entrance no longer works

 

 

0

How do I set up rear defrost on the Evo One MyStart2?

Hi, I have a 2020 Kia Sportage Push-To-Start. I am installing the Evo-One on it at this moment and I also have to set up the Rear Defrost + Trunk Open with the MyStart2 (Version 3.2.00). How do I add the aux in the MyStart2 for the Rear Defrost + Trunk Open?

Installation Guide Evo-One: https://cdn02.fortin.ca/download/81611/evo-one_ig_reg_bi_kia-sportage_2017_pts_b_81611.pdf

2nd.. Is there a way to lock the doors right after you close the door (lets say withing 10 secs)?

Thank You

 

**Edit** I found out trunk open is already set up with the MyStart2 so that works while I use it from the phone. Now Rear Defrost.. How do I set it up? I see it in the aux while I set up the rear defrost from phone but it doesnt do anything. Im guessing I need to tap on a wire?

0

RFALL642W with Evo one no remote start lock button will not lock. Unlock works, whats going on

Key programmed just fine car is push start 2013 kia optima

0

Evo One - 2007 Kia Rio, Trying to stop wipers from turning on

Evo One - 2007 Kia Rio, Trying to stop wipers from turning on no matter the setting while remote started to avoid damaging snow covered/frozen wipers, Thanks. In the manual it said to cut the wire, but no other info, and cutting it, they don't work at all.

0

Drone mobile dr5400 compatible with evo one

Is the dr3100 drome mobile the same as the dr5400 only with lte service

1

What to buy for 2018 European Kia Sportage?

Hi,

For a 2018 Kia Sportage (European), automatic transmission, with start-stop button, can you please tell me what I should buy together with the EVO-ONE in order to have a complete system (like range extension, Phone app, etc)?

Also, will the phone app work in Europe?

Is there a T-Harness available for it?

Thank you

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue