Hello,
I am having an issue with my installation I just completed.
I used the following Guide # 82741 ( https://drive.google.com/file/d/1FB45koxLUjZ1c26G2NwFK3VFuDIthVNs/view?usp=sharing).
I have the EVO-One w/ THAR-ONE-SUB1 T-Harness and Fortin RF642W remotes. Everything went smoothly for the wiring with the exception of the (~)IMO wire which I had to use the secondary location behind the fuse box on the left.
I originally had the Subaru factory installed remote starter I removed as well. (H001SAL003 I believe)
Everything works related to the module (remote starts, unlocks and locks, OEM and RF642W remotes work). Although, I did not wire a relay in for the OEM lock X3 feature, since I had the remotes.
However my windows now do not function at any of the doors. I have verified my wiring and will do again tomorrow but I was wondering if anyone has ran into this or can point me in the right direction.
I also took the car for drive last night and noticed the security light was slightly on... not fully bright but there.
I checked all the fuses in the engine bay and under the steering wheel.
Any ideas?
My account
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Find Our Products 
Order Our Products Online
Find an 
