Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

0

Dcryptor Process just keeps spinning

when tryign to do the dcryptor process, the circle just keeps spinning. SN#001A07 283508

0

2011 Jetta defroster connection to EVO-ONE

I plan to purchase an EVO-ONE & TB-VW for a 2011 VW Jetta S standard key and self-install it using the "regular install NO KEY REQUIRED" (Guide # 61511). My goal is to activate electric rear window and side mirror defrosters upon remote start. 
    Are additional wiring diagrams available from Fortin/wirecolor.com showing the rear window and outside mirror defrost circuit connections (these may be separate circuits) for this vehicle? 
Per prior Fortin response to a prior question: the EVO-ONE has an analog AUX output can be set to automatically activate when temperatures are below 5C. 
    Is that AUX output signal though terminal A13(yellow/black)? Is there an additional input connection to make for the vehicle's thermocouple? IF the rear window and outside mirror defrosters are separate circuits, does the EVO-ONE have an AUX2 that will serve the same function?
Regarding the THAR-VW3 harness; would using the THAR-VW3 for this install still allow the AUX/AUX2 functions described above or make them easier to achieve compared to the "regular install NO KEY REQUIRED" method?   Thanks!

0

2011 VW Jetta S - EVO-VWT3 Temperature options?

    Will the EVO-VWT3 or the EVO-ONE activate electric defroster based on temperature in a 2011 VW Jetta S standard key? If not, do you offer a product that does? (defrost is the entire reason I'm installing a remote starter). Does the 2011 VW Jetta S standard key support rear defrost control through the vehicle's CAN-Bus? 

0

Can you use RF642w with a thar-vw2 harness?

I purchased a full remote start kit with long range remote kit. Came with Evo-all, thar-vw2, flash link, and rf642w remotes. The rf remote kit has a different plug than the t harness and will not plug in. Is it the wrong rf kit or can the correct plug be spliced in?

0

DCRYPTOR PROGRAMMING PROCEDURE stop on step 5

https://cdn02.fortin.ca/download/65601/evo-all_ig_tsa_bi_vol3-jetta_2011-2014_key_tb_a_65601.pdf

when programming step 5 I put key in ignition and the blue light on the evo does not flashing 

What did I do wrong?

0

2011 MK6 Golf R Sometime Disarms Sometimes Doesn't

Hi I have some small issues with the fortin EVO-ALL connected via datalink to A Compustar FT7000 alarm/remotestart combo I am using my OEM Remote for locking/Unlocking duties and the Drone mobile system for remote start. below are the issues Sometimes on unlock it disarms the FT7000 sometimes it doesn't. Sometimes when starting the car with the key the hatch either locks or unlocks. Won't Remote start with OEM Remote (Lock Lock Lock). Firmware 75.22 The car is a right hand drive Australian delivered car with oem alarm and oem ultrasonics. All help would be appreciated Regards Chris Wormald

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue