2102 Ford Focus, not push-to-start.
Diagrams show two clutch switch locations.
One at the clutch pedal which is a basic switch to ground. The wire goes low as soon as the pedal is depressed. I can override that one by grounding the wire.
However Ford decided this wasn't good enough and added another switch in the circuit. This wire (Which I found in pin 12, 42 pin connector at the BCM) is actuated only when the pedal reaches the floor, one would hope it is a basic to ground switch as well but it certainly is not. My ohmeter reads 7Megohms resistance to ground at rest and 9ohms when the pedal is depressed. I cannot override this particular wire function by connecting this wire to ground. Has anyone else come across this?
The bypass module is evo-all and functions perfect, as well as the prostart remote starter so those two have absolutely nothing to do with this issue. The only thing I need to fix before this setup will work is to make the car start without physically depressing the pedal which in every other case should be to ground the clutch switch.
My account
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Find Our Products 
Order Our Products Online
Find an 
