I installed a EVO ALL kit with the thar vw6 in my audi a3 with normal key, i used the R-link for programing but i cannot get the blue led to flash.
firmware is 64.06 as recomended in the guide.
In the guide it states i should use the 21 pin connector on the steering cullom but ther is no such plug only a 16 pin wich i used.
I tried hard resetting it but i can still not get passed step 6.
I used this guide for install: https://fortin.ca/download/91861/evo-all_ig_rts_bi_aud_a3-s3_2015_key_tb_c_91861.pdf
sn:001A07 367489
Can you please reset my flash limit?
Edit: I have not connect the yellow wire from the harnes as it says: IGNITION OUTPUT FOR CONVENIENT DEVICE. Is that supposed to be connected to a 12v ignition fuse on the car?
My account
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Find Our Products 
Order Our Products Online
Find an 
