User

Hi, I have a 2020 Kia Sportage Push-To-Start. I am installing the Evo-One on it at this moment and I also have to set up the Rear Defrost + Trunk Open with the MyStart2 (Version 3.2.00). How do I add the aux in the MyStart2 for the Rear Defrost + Trunk Open?

Installation Guide Evo-One: https://cdn02.fortin.ca/download/81611/evo-one_ig_reg_bi_kia-sportage_2017_pts_b_81611.pdf

2nd.. Is there a way to lock the doors right after you close the door (lets say withing 10 secs)?

Thank You

**Edit** I found out trunk open is already set up with the MyStart2 so that works while I use it from the phone. Now Rear Defrost.. How do I set it up? I see it in the aux while I set up the rear defrost from phone but it doesnt do anything. Im guessing I need to tap on a wire?

Hi, I have a 2011 Kia Forte. Evo-One with T-Harness, automatic.

https://cdn02.fortin.ca/download/60911/evo-one_ig_thr_bi_hyu1-kia-forte_2010-2013_key_a_60911.pdf

I installed everything and programmed the module and the key and it went fine. Client doesnt have an oem remote. I tried to remote start and parking lights come on and then car shuts off. Parking lights flash 4 times after shutdown (does that mean I have to check the tach?). I did try the option 20, mode 2 for tachless and still nothing. Also the remotes wont lock or unlock.. 

Which wire do I have to verify? the can? Theres not much wiring on this car.

2019 Kia Forte (Manual Transmission)

https://fortin.ca/en/vehicles/kia/forte/2019-standard-key/

Hi, I installed everything and got to program the module and the 2 fortin key fobs. Then proceeded to perform the manual transmission sequence. My parking light did flash once and stayed on. The car kept running until I got out and closed the door again. So everything is good there I assume. Now trying to start the car with the remotes and my parking lights stay on for a long time then shuts off. no noise or anything. 
**I did not cut the loop on the module**

What do I need to do?

Is there a manual transmission wiring that I dont know about?