Votre panier

Votre panier est vide.

Votre panier est vide.

Continuer le magasinage

RECHERCHE RAPIDE DE VÉHICULE

RECHERCHE VÉHICULE

Questions & Réponses

Consultez les questions les plus fréquemment posées et trouvez des réponses pratiques et pertinentes.

recent questions tagged: ...

picto contact

Vous cherchez nos meilleurs participants ?

Voir les utilisateurs
picto contact

Vous n'avez pas trouvé ce que vous cherchiez ?

Posez-nous une question

0

EVO-One Unlocks and Starts Car but Doors do not lock after start

I recently installed a EVO-One in my 2011 Honda CRV using the T-Harness. It unlocks the doors and starts the car just fine using an RF kit. But it doesnt lock the doors after and once the engine is on the OEM fob and the RF kit doesnt lock or unlock the doors.

0

Door locking

Civic 2018, push button, Standard. 3 wird thing happening related to door locking. 1-When car running... unlocking door by touching the handle, we have to be realy realy quick to press the start botton (almost impossible), if not fast enough the car stop. But by pressing unlock to get in, it is ok. 2- Can not leave the car running any more when exiting with the key... 3- If you get out of the car when running and forget the key in the car... The car stop and look your key in the car (usually the car detect the key in the car and do not lock the doors) Thanks

0

oem lock and unlock works

hi derek oem remote lock and unlock works normal but vehicle doesnt stay locked once started with remote

0

OEM fob doesnt lock car but remote start works when lock pressed 3x

Installed evo one and its works with oem fob but now it doesn't lock the car when you press it once

0

2013 Civic MT, automatic unlock/lock cycle

After installing EVO ONE + EVO START 2, every time I: - put the car in ready mode, leave the car, lock it, then the car unlocks and locks back then engine off - remote start the car, first the car unlocks/locks then the engine starts - remote stop the engine, the car unlocks/locks first, then engine turns off. Why is this unlocking/locking cycle happens? Is it normal?

29/01/2019

Honda Ed S (130Pts.)

0

2017 Accord "Auto" headlights, Door lock/unlock. EVO-ONE

i am looking forward to installing the EVO ONE with T-Harness in my 2017 Accord CVT Standard Key. i keep my car's headlights set to "Auto" i know the headlights will turn on automatically if i remote start the car BUT, will the lights automatically turn off if the remote start timed out or if i turned off my car with the remote? 2.can the EVO-ONE be programmed to press unlock once to unlock all doors? 3.will my car's door auto lock/unlock when i turn the key in the ignition ON or OFF? 4.will the EVO-ONE need to be re-programmed if my car battery dies or the car battery gets disconnected?

0

2017 Civic PTS, doors no longer locks automatically when getting out of the car

The doors no longer lock automatically when I get out of the car. I used to turn off the car with the PTS button, get out of the car and the doors lock after few seconds, but since I updated the firmware of the evo-one (and the wirings), they no longer lock automatically. I mean, I wait an hour after getting out of the car and the car are still unlock. When I remote start the car, the doors relock automatically. The problem is only when I get out of the car. As I said, with the previous firmware, I have no problem. Can it be an option in the firmware? I recheck the wiring 3 times, but can it be a bad soldering? Thanks!

0

2017 Civic Si, EVO-ONE, doors no longer automatically lock when driver get out of the car

The option is still enabled in the car's settings, but the doors no longer lock automatically when the driver get out of the car, even if the driver does not activate the ready mode

It doesn't work since the EVO-ONE firmware/wiring has been updated for the key takeover

 

2017 Civic Si, PTS w/ manual transmission

 

0

Evo-All Lock/Unlock Function

Hello, 

I installed a Compustar CS6502-AS with Fortin Evo-All bypass module.  Everything seems to be working fine, but i noticed a couple of strange behaviours with the door lock/unlock.  

1.  Whenver I press the lock button on the Compustar remote, the doors lock, then after about a second unlock and then lock again within about half a second.  I am not sure if that is normal but it does not seem like it as the OEM remotes do not seem to do that.  

2. Ever since I enabled Option C1 for the OEM Remote Status (Lock/Unlock) monitoring is that whenever the key is put into accessory postion all of the door unlock.  Very strage.  I've confirmed the two lock/unlock wires are correctly connected.

Any help or insight would be greatly appreciated.  

Tom

0

Evo-All Bypass Door Lock Function

Hi there, I recently installed a Compustar CS6502-AS with Fortin Evo-All bypass module. Everything seems to be working fine, but i noticed a strange behaviour with the door locks. Whenver I press the lock button on the Compustar remote, the doors lock, then after about a second unlock and then lock again within about half a second. I am not sure if that is normal but it does not seem like it as the OEM remotes do not seem to do that. I am not sure if this is a bypass mdule programming issue, Compustar issue or a wiring problem, but I thought I would start here. Any help or insight would be greatly appreciated. Thank you, Tom

18/11/2017

Honda AndyT (130Pts.)

0

OEM remote lock/unlock not working while vehicle is running on 2006 Honda Odyssey

I have a Fortin EVO ALL with a Crimestopper RS1-G5 remote starter on my 2006 Honda Odyssey. Remote start works great but I can not lock/unlock with the OEM remote while the remote start is active. When I press the lock/unlock buttons on the remote, the blue light on the EVO-ALL activates. If I manually unlock the doors with the key, the sliding door button on the OEM remote still works. I did not hard wire any connections to the lock/unlock wires as I thought the D2D connection between the starter and EVO-ALL would take care of that. I searched and firmware is 4.18. I don't own a unit to upload the latest firmware. Would the update allow for the OEM remote to control the door locks while the engine is running? I've read mixed information on this. Or should I hardwire the lock/unlock wires to the EVO-ALL?

0

Using Drone app to lock/arm car and when using the OEM remote key fob to unlock alarm trigger when opening the door

So I finally got the Evo-one/Drone to work with my 2005 Honda Pilot over the weekend. However while using the Evo-one/Drone app to lock/arm the car and when I use the OEM key remote fob to unlock while opening the door trigger the alarm. When the alarm is trigger can't use the OEM key remote to disarm, only Drone app that was use to arm the car will disarm it. While I use the OEM key remote fob to lock/arm the car, I can use the Drone app to unlock/disarm the car and able to open the door without trigger the alarm. Is there a setting in the EVO-ONE that I need to change in order for the alarm to turn off when I use the OEM remote to unlock/disarm the car when the Drone app is use first to lock/arm the car? Or is that not possible

0

Auto Lock Doors After Remote Start - Honda Pilot 2014

Evo One. When remote start with 3X "Lock" on FOB, the doors will UNlock, and engine remote start. That is fine. However, the doors remain UNlocked, even after 30 seconds of remote idling. We have to press LOCK on the FOB a 4th time to lock doors, while remote idling. Did a Master Reset, then set" 1. 6.3 Lock after Remote start 2. 24.4 Turn off engine when foot brake is pressed (FYI: which does not work, but it did enable "press LOCK on FOB 3 times to kill engine" when remote idling - which I thnk is better than foot brake kill anyhow.) 3. 32.3 Blue Wire (grounded) 4. 38.2 Enable 3X lock for remote start. As side note, replaced Engine Battery right before Evo One install, thus lost all Honda "Custom" setting I enabled via dash knobs a coule years ago, such as auto lock after 30 seconds, if door is not opened. In other words, maybe Evo One cannot re-lock, unless I enabe custom Honda Settings via my dash???

0

2014 Honda Accord EVO one ALL doors unlock on single unlock command

(Revised) Updaed s/n to correct number number Just installed an EVO one this afternoon and after completion I am having troubles with the door locks. It seems all doors unlock, the car starts, then all doors lock again. But now when I go to get in the car I hit unlock once on My remote and all 4 doors unlock instead of the drivers door only. In Todays World this is a security concern for My Wife and I as this is Her car. Note; I found You can disconnect the wires for the door locks and the EVO one can actually control the locks thru CAN. I tried leaving the door lock/ unlock wires disconected but the doors will unlock/ car start/ then relock, only problem once the engine is running the remote will no longer unlock the doors at all. I also tried turning off the unlock doors settings in the EVO and to my surprise this car will start without unlocking the doors as well. But the same issue remains the Fortin keeps unlocking all 4 doors regardless of the B1 option being turned on for drivers door only. I have tried different firmware versions with mixed results. I

1

2007 civic car locks on its own with evo all

2007 civic with a evo all locks will lock on their own. Would I be better off just hardwiring the locks from the remote starter and not using the output of the evo all?

05/01/2015

Honda YU KEI (460Pts.)

0

unlock before start & lock after remote-starts

2015 honda CRV (Push start). installed fortin remote unint(e400) with bypass Eva all . Car will unlock door lock before starts,but will not lock after . I tried flash link EVO opinion to enable the function,didnt work , so disenable at flash link and programed E400 with fouctions #6 mode 2. still door lock will not lock after starts any ideal ??? Eva all service # 001a06448596.

Ce site Web utilise des cookies pour vous garantir la meilleure expérience utilisateur. En poursuivant votre navigation sur notre site, vous acceptez notre utilisation des cookies. En savoir plus Continuer