I have a 2016 Mazda 3 doing a stand-alone install with a T-Harness. Following the guide: http://cdn02.fortin.ca/download/62681/evo-all_ig_tsa_bi_maz1-3_pts_2014-2017_door_v2_e_62681.pdf.
Once completed, I will have only connected A8 and A20 directly from the "A" connector. Can I cut the other wires from the A connector for a "cleaner" installation? Obviously I would leave A1, A10, A19 because those are fed from the t-harness connections.
Also, if I have no plans of adding an RF kit, can I cut/remove the white & blue wires on the "B" connector as well as the "extra" red and black wires leading to the RF kit?
Like I said, just trying to make the cleanest install I can.
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
