Just a heads up,I was using a Evo-chrt4 with a compustar 7000 on a 2014 caravan with firmware 74.24 and something from the evo-all was latching the ignition output on the compustar:
Yellow wire from t-harness functions properly as ignition.
with only the evo and harness plugged in ignition funtions normally.
with only the compustar and harness plugged in everything functions normally
with the evo plugged in and only the main harness (not the 4 pin data cable) on the compustar plugged in everything functions normally, plug in the 4 pin data cable and as soon as ignition is turned on it latches and theres a single click coming from the compustar at regular intervals and would require disconnecting starter brain to stop it, tried a 7200 brain with the same results.
roll evo frimware back to 74.22 and everything functions perfectly
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
