Votre panier

Votre panier est vide.

Votre panier est vide.

Continuer le magasinage

RECHERCHE RAPIDE DE VÉHICULE

RECHERCHE VÉHICULE

Utilisateur

Adam Pepin

À rejoins en date due:

Oct. 29, 2010

Points

10150

Commentaire(s)

18

Questions votée(s)

0

Réponses votée(s)

3

Votes positifs

0

Votes contre

3

Votes reçus

3

Votes négatifs reçus

0

picto contact

Vous cherchez nos meilleurs participants ?

Voir les utilisateurs
picto contact

Vous n'avez pas trouvé ce que vous cherchiez ?

Posez une question

0

2015 grand caravan i get to step 6 blue light goes out but remote wont activate start when pressed 3x

I have the evo chrt4 tee harness i conected the yellow wires and installed I get 20 step 6 blue light flahsing ihit the lock button and blue light goes out but key wont activate start aaaaaaIs there more power conections or other conections i should have done and missed

0

2012 Ford Fusion Evo Fort 1 door pin green / violet connector spot 9, no wire assigned to that spot. Any Ideas?

Evo Fort 1. I took the connector off for the door pin. The 26 pin connector where the directions say pin number 9 is suppossed to be the green violet. I took the connector apart and there is no wire associated with pin slot 9. Any idea on where my door pin should be? With that said is pin 8 and 6 for the lock unlock feature going to be in a different location as well?

12/11/2016

Toyota m l (160Pts.)

0

2015 Corolla H-Key program but no start

Installed with Viper 4105V. Connections were right . Programmed Evo-All, just cranks but does not start. I put the key in the barrel and starts. Red led not coming on when starting, instead it's the yellow led. Thanks,

0

Picture of Nissan Versa 2012 Intelligent Key

I was wondering if someone could send me a picture of a nissan versa intelligent key. I have a 2012 Nissan versa sedan with what i believe to be intelligent key. it is NOT a push to start. I have puchased the EVO-ONE and NIS2 Harness. In order to start my vechicle i have to physically insert a key into the ignition however on the handle side of the key it has the lock, unlock, and panic button. The fob and key are one and connected i will connect a picture to show you: 

0

I did all the steps but 3x starter don't work ?

I did all the steps but 3x starter don't work ?

EVO-FORT1

Ford Taurus 2014 SE

 

0

Site only show T-Harness installation guide. Is there any additional wiring needed for the 05 Hyundai Sonata?

Wiring diagram came with EVO-ONE. But there is no other installation guides on the site other than the T-Harness installation. Does the 05 Hyundai Sonata only require the T-Harness and no other wires connected.

0

Issues with Evo-Fortin on '11 F-250

Installed a EVO-FOR.T1 on my '11 F-250 gas and not having any luck. Data and transponder programming looks good. When I try starting the truck with OEM lock button 3x, the red LED light flashes 5x. The vendor I bought from said the 5x red LEDs is an issue with the hood. I checked, there are no switches under the hood that tell the computer the hood is open. No plugs anywhere near the hood latch. Any ideas where I should start looking?

0

2012 F150 programs OK but will not Remote Start

I have followed the instructions to program. I get though the programming portion OK. I do have the three wires from the T harness conencted to the 20 Pin connector. When I press lock three times, i get a single Blue flash for each key press. I never get the remote start. When i insert my key into the ignition, I do get a yellow light on my Fortin. Do I need to have my Yellow - Black from the 20 Pin grounded? I read that in another FAQ. Do I need to buy the programmer?

0

2004 Chevy malibu will not start after installing remote starter kit with Evo All. Why?

I hooked all the wires up according to the downloaded instructions. The only wire I have not hooked up is the PK3 connection as I do not believe my car has this option.

03/09/2016

GMC timmerk (950Pts.)

0

Differences between EVO-ONE and EVO-ALL?

I'm comparing the EVO-ONE and EVO-ALL for a 2008 GMC Sierra 1500. On the comparison page, the only difference appears to be that the ONE doesn't support acting as stand-alone remote starter. However, on the general page of the ONE: http://fortin.ca/en/products/evo-series/evo-one/, it says both "remote start interface", but then is also says under Advanced Features: "Stand Alone Remote Starter". So, which is it? Also, I belive the ONE has AUX 1 and 2 outputs, but the ALL has AUX inputs. Is this true? The ONE appears to support Accessory out, but the ALL does not. Is this correct? I don't see an input on the ONE to trigger the Accessory out, so how is it used? What other differences are there?

0

Tacoma 2016 hkey won't remote start "brake on"viper

I have a evo all working with a viper 5906v remote start. programming worked for the module but when I press remote start on the viper remote. It says "brake on" as of the brake pedal is depressed.

0

2013 F150 EVO-ALL, added SmartStart but lock/unlock doesn't work

Everything works great using the fob itself (OEM) and I have it setup for lock-unlock-lock SmartStart VSM300 installed today, flashed to activate RF unit in EVO-ALL. SmartStart unit starts the truck fine, but the lock/unlock does not work through the app/smartstart. it appears to "send" the command for the lock/unlock, but it does not lock/unlock without doing it on the OEM FOB. Any thoughts? That said, could this be because I DO NOT have the wires tapped at the BCM for lock, unlock and the door pin? It didn't say they were required connections on the basic (use OEM fob) install. However, are they required to get the SmartStart/RF unit to lock/unlock the truck? Joe

0

2015 Dodge Journey Evo-chrt6 won't strart

All programming went as it should according to manual. All leds work as they should. Will not start vehicle by pressing lock 3 times.

0

2014 caravan, firmware 74.24

Just a heads up,I was using a Evo-chrt4 with a compustar 7000 on a 2014 caravan with firmware 74.24 and something from the evo-all was latching the ignition output on the compustar: Yellow wire from t-harness functions properly as ignition. with only the evo and harness plugged in ignition funtions normally. with only the compustar and harness plugged in everything functions normally with the evo plugged in and only the main harness (not the 4 pin data cable) on the compustar plugged in everything functions normally, plug in the 4 pin data cable and as soon as ignition is turned on it latches and theres a single click coming from the compustar at regular intervals and would require disconnecting starter brain to stop it, tried a 7200 brain with the same results. roll evo frimware back to 74.22 and everything functions perfectly

0

2016 cherokee firmware/guide

I noticed the new cherokee is listed as supported but no guide comes up, i have one scheduled saturday. Is there a guide available?

1

Dodge 2012 Avenger remote start access seems impossible to reach the plug i was told to drill it, how no space.

Why cant it be done by removing the lower panel like every other dodge?

1

dodge ram 2013 at fortin.ca website only up to 2012

i want to install aftermarket remote start to a dodge ram 2013 , but on the web site does not have any thing for 2013 yet , so can i use evo-all of 2012 on 2013 ?

2

can you use d2d with evoall on the 2015 kia sportage automatic key start, with autostart as1774 remote starter

is it possible to use d2d hook up on a 2015 kia sportage key start, with an as1774 autostart thanks

0

07 F150.EVO-ALL. remote start starts vehicle but nothing works through the D2D

I installed the evo-all hooked up so everything would work throught the D2D. I hooked the lock, unlock, brake and tach from the remote start to the evo-all but the functions do not work. in the manual for the CAN network wires are different in the truck compared to the manual. its pins 6 and 14 not 3 and 11. Is there something I missed or does the CAN hook up feature not supported on the f150?

1

Problem installing EVO-ALL in 2012 Ford Mustang Please help?

Installing EVO-ALL in 2012 Ford Mustang. Did not work with instructions from box. Went through tech support wire connections good. Tech support said I need to install using Dcryptor procedure & Flash Link 2.0. Went through steps 1-8 to program key in module all lights flashed correctly through this process. Connected Flash Link went to updates selected Ford Mustang 2012 and then selected the recommended update 71.32 and updated. Said EVO-ALL update successful. Disconnected from Flash Link and re-installed in car. When all wires connected no lights. When push lock button on key 3 times blue light flashes each time but no start. When pt key in ignition no lights. Turn key to run get yellow light. When start car still yellow light. First time I started car When I shut off the key and pulled key out of ignition car continued to run so had to disconnect EVO-All for car to shut off. The car now starts and shuts off even with EVO-All connected but no remote start. Can you help me to get the remote start to work? EVO-ALL Service No. 001A06537118 Flash Link Udater Service No. 002503026333

0

2009 Kia Sedona doorlocks

2009 Sedona install was done mid december 2015 - Autostart with Evo-all, initially used 76.22 programmed fine but no door lock control, tried 76.21 and 76.20 still no door locks, called tech support, they suggested trying 76.10; Program 76.10 doorlocks work, needed to set double pulse unlock on the autostart to have passenger door unlock(76.10 doesnt have the option of double pulse unlock) Customer calls me back the other day and the following is occuring: when the vehicle is running under remote start all doors will unlock with one press, however when the vehicle is off hitting unlock will unlock all doors except the drivers door, if you hit unlock a second time then the drivers door will unlock. Any thoughts?

0

Trouble Shooting

Im using the Fortin Override All with the CrimeStopper RS4-G5 remote start on a 2011 Toyota Corlla with the G-Key. Fortin module shows it is programed correctly. Started the car with the remote and the starter stayed engaged a few seconds after the engine started, then the engine shut down. Then without using the remote or key, the starter engaged again trying to start the car but the engine would not fire. Tried starting with the key and the engine did start and would run?

0

How to get the Center Brake light turned on by EVO- 2010 Nissan Altima

EVO ALL and T-HARN connections are all good. Programmed EVO fine. When pressing remote 3X, the car does not start, but the brake lights come on. The EVO shows a red LED when trying to start. I called Fortin tech support and they told me that the problem is related to the center brake light not turning on by the EVO. The center brake light turns on OK by pressing the brake pedal. EVO is not sending some signal to turn on the center brake light. I tried to use both RL1 and RL2 connectors and both do the same thing. Any ideas on how to get EVO to turn on the center brake light?

1

Dodge 2013 ram 1500 OEM remote will not respond once truck is started

OEM remote LOCK- LOCK-LOCK sequence starts 2013 dodge ram 1500. However once truck starts the OEM remote does not respond especially to unlock the doors. Yellow and red light are ON on the EVO box.

1

EVO-ALL + FT-D100 w/ 2 WAY COMPUSTAR- Lock doesn't work

I succesfully paired the Compustar G9 2-Way antenna via the FT-D100 RF decoder but locking does not function on the Compustar remote. I get a success chirp / green flash on the fob and I can see the EVO-ALL recieving the command but it never actually locks. Unlock & Remote start work perfectly. I have tried swapping the blue/white on the data link back to see if it is a communication error as well. Is there something I need to enable on the EVO-ALL aside from the FT-D100 RF option? Another weird note. I couldn't get 2 way notification to work until I unplugged the canbus and plugged it back in after programming. Prior to that the Compustar remote was only working as a 1 way.

No results

picto contact

Vous cherchez nos meilleurs participants ?

Voir les utilisateurs
picto contact

Vous n'avez pas trouvé ce que vous cherchiez ?

Posez une question

Support Technique

Recherchez parmi nos produits les plus populaires et les sujets d'installation disponibles dans notre section Questions et réponses.

En savoir plus
Téléchargez notre application de guides de dépannage étape par étape disponible pour iOS et Android ou parcourez notre version de bureau.

En savoir plus
Accédez à la plus grande base de données de schémas de câblage et de photos en ligne de l'industrie. Un jeton gratuit est fourni dans chaque boîte EVO-SERIES.

En savoir plus
Vous n'avez pas trouvé l'information que vous cherchiez ? Posez-nous une question en remplissant le formulaire de demande de support technique. Un spécialiste produit vous répondra sous peu.

En savoir plus
Des solutions de contrôle à distance et de connectivité à la fine pointe de la technologie au soutien technique haut de gamme, découvrez pourquoi vous devriez choisir les produits Fortin.

En savoir plus

Ce site Web utilise des cookies pour vous garantir la meilleure expérience utilisateur. En poursuivant votre navigation sur notre site, vous acceptez notre utilisation des cookies. En savoir plus Continuer