Installed a RS using the EVO ALL as the bypass. Everything connect as per instructions. Verified twice the correct wires and connections. Module programs as per instructions. Everything works, tach signal, brake,hood status, start, lock, unlock, arm, and disarm. But now the Auto Lights feature of the car does not work. Disconnected the parklight Mux wire but the problem still existed. Studied the intall guide and decided to reconnect wires labeled Cut 1 and Cut 2. With these two wires not running into the EVO ALL the Auto Lights feature works. The only issue I found with this is that the fatory remote will not work on the door locks. My questions is why is there interfence with the Auto Lights when Cut 1 and Cut 2 are connected to the EVO ALL?
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
