Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

0

Hi, OEM key fob not controlling Evo one alarm

2015 Hyundai azera. OEM key fob won't control Evo one alarm only get horn confirmation with Fortin RF kit, is there a setting i need to change? Also OEM key fob not working with car running. SN 002B04260503

0

Why does the remote start stop working after a while

So I install the EVO ALL SN: 001A07 196424 in my Hyundai Sonata Sport Key To Start and it works perfectly when it needs to. After like letting it set for a about 30 mins or so, I noticed it doesn't react to me pushing the lock button 3times. The only way for it to actually work I need to like turn the engine on as like a "hey wake up". After turning the engine off for about again 10 to 20 mins, you can still remote start it but it's like after a certain about of time passed, it wouldn't "wake up". I don't know what to do and at this point if nothing can be done, I don't want it!

0

Remote start does not start elantra

When I try to remote start evo one parking lights flash 4 times and nothing happens. Automatic transmission the loop is already cut. Tried previous firmwares too still not working.

0

2011 Hyundai Tucson Regular Key EVO ONE will not remote start

EVO one wired to 2011 Hyundai Tucson regular key no blue data wire per evo one install 2011 hyundai tucson installation guide.  Evo one has been flashed to recommended firmware for this car, hardware 2.  The unit appears to program correctly per program #2 (car has no blue data wire) and blue light flashes rapidly after start.  Turn engine off and back to run, and the yellow light remains steady yellow.

The unit is detecting oem keyfob lock and unlock signals (blue can light flashes).  3x lock start has been activated on both remote start and bypass.  3x lock on the oem keyfob initiates remote start...the units red light goes solid red, then yellow light solid also lights up.

This is where the issue is.  The car flashes its parking lights one time, and on the dash the indicator for "door open" turns on and the dome light illuminates....but nothing happens.  There is no initiation of ignition, accesory or even an attempt at cranking.  This sequence happanes twice, and then the unit shuts down.  It does appear that the small red indicator light by the yellow "loop" is rapidly flashing during this process, as if the alarm has not been disabled?

I have rechecked all connections numerous times.  Correct locations and solid soldered connections. Have tried enabling unlock before start/locl after remote start with the same result.

Tested as both remote start and bypass mode, same results.  

SN: 002B01005141

 

Any help with figuring out how to remote start with 3x lock press greatly appreciated.  The fact that the unit responds to oem keyfob presses in encouraging...would love to get RS working.

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue