Last night I successfully installed the Evo One Module in my 2011 Nissan Frontier with the T harness. It would remote start and unlock/lock successfully. I then used the Flash Link Updater to change the 9.1 setting to ON, but it was already on so I saved and exited without changing anything. I plug it all back in, and unlock/lock works, but the emote start wouldn't. I gave up and tried again to solve the issue today. I couldn't enter bypass programming mode on the module or remote programming mode with the valet switch so I unplugged it, played with some settings on the FL2, and plugged it back into the vehicle. The yellow led stayed solid and nothing could be programmed so I unplugged it and changed the settings back on the FL2. Now I plugged it back in and no LEDs come on at all, I can't enter programming for bypass or anything. But the LED's do come on when I connect it to the FL2. Does anyone have any advice? None of my wiring connections have changed, juat settings on my flash link manager. I could really use some help. I have followed the guides exactly but have no idea what to do next.
My account
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Find Our Products 
Order Our Products Online
Find an 
