Hi,
2009 elantra manual model with clutch switch bypassed.
When trying to activate ready mode, the ligths flashes 3 times but upon turning the ignition off, the engine stops and when attempting to remote start it flashes 3 times indicating ready mode not set.
The ignition 1 and ignition 2 wire are connected. Accessory wire is wired to accessory also. Yellow wire from evo one goes to clutch switch.
Key was bypassed and door locks work. I'm thinking it doesn't engage into ready mode as the unit doesn't see engine RPM on the CAN maybe ? Because using the RF as the only setting to engage ready mode still didn't work.
Thank you
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
