I have installed the EVO all with the Thar1-For harness. The programming of the EVO all goes all as mentioned in the manual. But the remote start system does not work.
It states in the manual that you have to connect it the Orange wire from the 20pin EvoAll connector to the Ground running wire. Which wire is this ? Or can I just connect it to the car ground.
Next the SMJ box is in the passenger side of the vehicle. This means i have to run the wires from the SJB to the EvoAll.
Next, I cant seem to locate the 26 PIN connector in the car. I have however figured out that the Mustang does not have a 26pin connector.
Note that I am using this as a stand alone remote start (i.e. 3X remote start). But still the car does not remote start even after the programming.
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
