Wondering if the CANBUS can be used to control the rear defroster over AUX2 on the EVO-ONE for a 2010 Mazda6, and if so if there's a setting in FlashLink that should be enabled. I don't want to pull the unit back out of the car if it isn't even possible.
If it's not possible for this car, I'd like to know if the (-) Ignition green wire on the 20 pin connector is available for use--if so, I should be able to wire it to a 12V thermostat cooling relay (something like this https://www.amazon.com/RioRand-Thermostat-Temperature-Controller-Waterproof/dp/B00KCCX0EE) to send ground through the relay based on temperature. Thanks!