Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

0

Mazda 3 2018 - Evo One - Rear Defrost

I installed a Evo one in a Mazda 3 2018 push to start automatic with the Thar-One-Maz3 Harness with OEM remote (3x lock). I want to activate the rear defrost on remote start. I have activated the option 39. On wirecolor, it says that the rear defrost is "Positive". Two questions : - What option should I take for 25 ? (there are 6). - How I set the A13 wire to send positive signal ? - How do I wire the A13 ? Do I simply tap on the vehicule wire ? Thanks ! How can I activate the rear defrost ? On wirecolor, it says that the rear defrost is "Positive". I have activated the option 39. What

0

Force seat heater and aux input on

Hi, I have and Mazda3 2019 (with push start and presence key) and installed an Evo One + Thar-One-Maz5 + Evo Start2.

I've connected the auxiliary output on a relay to activate the windshield heater and rear window defog (in the mazda3 both are activated together with a ground signal). Its supposed to ground the yellow/black wire when the seat/driving wheel heaters are activated right?

I was not able to test it yet, my car stays in a heated garage and if i understood correctly the evo one uses the internal temperature sensed by the module to activate or not the seat and driving wheel heaters (and the auxiliary signal). So the car doesn't stay parked out for long enough to get so cold inside. 

If i use the defrost button in the app, will it bypass the temperature control and activate the headers/auxiliary signal? If not, is it possible to change config to manually control those? 

Thanks!

 

1

Can 2010 Mazda 6 rear defroster be controlled via Canbus with EVO-ONE?

Wondering if the CANBUS can be used to control the rear defroster over AUX2 on the EVO-ONE for a 2010 Mazda6, and if so if there's a setting in FlashLink that should be enabled. I don't want to pull the unit back out of the car if it isn't even possible. If it's not possible for this car, I'd like to know if the (-) Ignition green wire on the 20 pin connector is available for use--if so, I should be able to wire it to a 12V thermostat cooling relay (something like this https://www.amazon.com/RioRand-Thermostat-Temperature-Controller-Waterproof/dp/B00KCCX0EE) to send ground through the relay based on temperature. Thanks!

0

How do I set EVO one to turn on rear defrost in 2014 mazda 3

I have 2014 mazda 3 evo one installed with t-harness. how do i get the defrost to turn on when remote starting? The heated seat and blower turns on just not rear defrost.

0

How do I ground the valet switch

Im installing on a 2015 Mazda 3 and I’m seeing that the valet switch can be used in place of the hood pin. I see it just needs to be grounded? Does this mean I just need to splice one wire from the switch to the blue wire on the harness and then the other wire to another ground wire or Somewhere that’s metal? Also, if I install this and decide I’d like to change a setting on it, can I just unplug it from the car and then hook it up and change the setting and plug it back in? Or will I need to reprogram it with my keys and everything all over again? Would there also happen to be a way to control the front and rear defrosters with an added mobile remote start app? Sorry for all the questions!

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue