Français
My account Register
Français
EVO-START Wirecolor

Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

ESTIMATED TOTAL:

Checkout

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

Clear All
Collapse All
Expand All
Clear All
Collapse All
Expand All
picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question
RÉCENT HOT! MOST VOTES MOST ANSWERS MOST VIEWS

13/11/2013

 Acura Jesse Hir (680Pts.)

2

10 Acura RDX Door Locks won't unlock if running unless you lock first

Using Evo-All with Ultra Start 3295 2way wired D2D. Vehicle is set to unlock doors, start vehicle, and lock doors--set through evo-all. Most current update in evo-all. If remote started, the doors unlock, vehicle starts, doors lock.==Perfect Problem is when customer comes to vehicle and pushes unlock on remote starter remote the doors will NOT unlock unless you push the lock button first.(even though the doors are locked at start up) Seems like something in the settings must be wrong but what??
Login to reply View 1 answer(s)

13/02/2018

 Acura Chris Wormald (410Pts.)

1

2004 TSX Crank but won't start

Hi All, I'm a bit stumpt on this one, I have a 2004 Honda Accord euro (Australian version of the Acura TSX) i'm using an EVO-ALL with Compustar FT7000, the EVO-ALL has programmed correctly but the car will only crank on remote start and not start, put the key in the ignition and the car starts fine I have reversed the white red and white green which did not fix the issue and I have tried earlier firmware which also didn't fix the problem, when the remote start engages the yellow and red lights light up on the evo-all. If you start with just the key only the yellow light is lit. anyone have any insight it would be greatly appreciated alos the car will start with the key even if the security light connection is cut which leads me to think it is to do with the data wire which is connected to the light blue wire of the evo-all (i have checked twice to make sure it is not connected to the light blue/black wire. Regards Chris
Login to reply View 0 answer(s)

13/07/2016

 Acura James Brady (170Pts.)

1

Evo-Onel 07 MDX shock sensor install

I try connecting the shock sensor to the 3 port connection of the Evo-One, but when testing the port it has no positive output, and from what I can tell no ground. How could I hook up my dual stage shock sensor to this great all in one unit. I have my smart start hooked up and running as well as my parking lights working (-), thanks to Jesus' quick detailed replies. Is there a setting I missed or perhaps a pair of wires I could connect the signal wires to and ground the negative and get power from another wire when armed, similiar to the evo-all.
Login to reply View 1 answer(s)

29/11/2015

 Acura Jesse (230Pts.)

1

Acura TL no start with 3x lock

2010 Acura TL PTS doesn't start with 3x lock. I see the module going from red to red and blue but doesn't start. I have a LED status light hooked up to my remote start and it isn't on or blinking at all. So I'm thinking it's an issue on the remote start side? Not sure where to start. I've programmed the evo successfully multiple times.
Login to reply View 1 answer(s)

28/11/2015

 Acura Jesse (230Pts.)

1

Can't get power to Evo

I double checked that the 12v for the remote start is good, then I connect the data link to the evo but it doesn't get any lights. Would other wires affect this? Or is only power required to just get lights on the evo? Using RS00-G5 and EVO-All on 2010 Acura TL push to start
Login to reply View 1 answer(s)

08/05/2015

 Acura Tobey Payton (190Pts.)

1

2010 TL PTS Error Message

I have installed the EVO-ALL unit with a Prestige APS-57E in a 2010 TL Push-To-Start car. The system works perfectly fine, however upon remote starting the vehicle an error message stating "Service Keyless Starting System" is displayed. I was certain this was to just be ignored, as the starter shuts down when the door is opened, and upon restarting the message no longer displays. However my customer returned, showing that this message now displays even after this restart. The message does not display, however, if the starter is not used to start the vehicle first. I am certain the car is merely confused and there is nothing wrong with it. Is there some kind of change that needs to be made to eliminate this message?
Login to reply View 1 answer(s)

27/02/2015

 Acura Mike Monoker (140Pts.)

1

evo one doesnt seem to be putting out voltage when remote starting

I followed all the instructions provided in the service manual and the blue led flashes when I hit the lock button on the factory fob and when I hit lock 3x the red and amber led turn on but none of the lights on the dash come on and the car doesnt crank. Also a side point I noticed that the tech sheets from fortin and the wire color website dont match up all the same wires.
Login to reply View 2 answer(s)

06/08/2014

 Acura david reich (180Pts.)

1

dei smartstart add on for standalone evoall

2014 acura rdx (or any standalone). i see it's a standalone. can i & how would i add on dei smartstart.ty. dave securely
Login to reply View 1 answer(s)

21/02/2014

 Acura Brent Heldens (140Pts.)

1

why does green security light flash after takeover

2002 acura el. EVO ALL After takeover the green security key light flashes. Suspect that the module should stay on for ignition cycle. Not sure why it doesnt. Re checked all wiring and its ok. Car starts and runs ok. The only way to get the light to not come on is to start it with factory key next to the ignition.
Login to reply View 1 answer(s)

15/03/2024

 Acura Son Vo (130Pts.)

0

please reset flash limit on my evo-one

Evo-One S/N 002B04 252778
Login to reply View 1 answer(s)

09/10/2023

 Acura mariser (130Pts.)

0

2018 Acura MDX EVO-ONE + T-Harness w/ take over

Have such problem’s: 1) Almost always (7/10 remote starts) after successful remote start have keyless access system indicator after press and release the Push-to-Start button once 2) and I think as a continuation’s of the 1st problem do not work multi-view rear camera (also 360 view) and blind spot system. When I turn on reverse gear I dot alarm on display: rear view camera do not work when engine do not start. So only stop and start engine again fix it. Please advise
Login to reply View 1 answer(s)

01/07/2023

 Acura Gary Vongsamphanh (130Pts.)

0

'10 MDX EVO-ONE w/ RFK942 remote not working, no green led lock/unlock/start

I've installed the EVO-ONE & harness w/ RFK942 remote kit on my wifes 2010 Acura MDX and it has been working fine for about 3 years till now. My wifes tried to remote start and car was not on when she walked to it, and she tried to unlock using the 942 remote and it didn't unlock for her nor any other buttons did not work. Used her oem remote to unlock and locks fine but alarm goes off when opening door due to how it's programmed but eventually she got it to disarm. To troubleshoot, I've tried pressing all buttons and all lights the blue led for button press confirmation but did not light a green led for confirmation of communication to main brain like it usually do. Checked if remote buttons is disabled (trunk>lock+trunk) but remote with just blink rapidly for a second and no leds on. Check if in valet mode and it was not as the led was not constant lit on antenna. Then I've reprogrammed the remotes (2nd remote probabaly just need new battery but if i press 2 buttons a second apart the 2nd press will not confirm blue led press and remote will not light any leds when any buttons are press for about 5-10 seconds and will not program). None of the above did not fix issues. I am seeking solutions before I dig into the dash to reprogram the brain. Thoughts?
Login to reply View 1 answer(s)

16/02/2023

 Acura Keith Fogah (130Pts.)

0

Please reset the flash limit on my EVO-ALL Serial# 001A06471376

Please reset the flash limit on my EVO-ALL Serial# 001A06471376
Login to reply View 1 answer(s)

13/11/2022

 Acura Minh tran (130Pts.)

0

No PTS output from evo

16 RDX. Car goes through starting sequence but no crank due to no pts output from evo. If I press pts manually at the normal point rs would crank car starts right up.
Login to reply View 1 answer(s)

23/01/2022

 Acura nader dana (280Pts.)

0

Difficulty in programming EVO-one for Acura RL 2010

Firmware is updated to 73.[38] . When I insert the 6 pin connector the red light does not become solid for me to release the programming button. It keeps alternating the blue ,red, yellow and blue&red and I have done disconnecting and redone step one many times with no result.How can I fix it?
Login to reply View 1 answer(s)

15/01/2022

 Acura Christopher Plank (130Pts.)

0

2011 Acura MDX Help....

I installed two of these on my vehicles in the past and everything worked flawlessly. I love this product. However, today I installed this on my coworkers 2011 MDX (Acura) regular key, evo all, with T-Harness. I made all the connections as per the instructions. The hardest part was getting steering wheel column plastic off. HAHA I pressed the button and plugged in the 6 pin connector and it just continues to flash thru the colors. It never turns red like the instructions say. I did a trouble shooting form on the website and it says the firmware is out of date. So I just bought a flash link updater. Is there anything I missed?? Are there any hints to let me know about for the updater when I get it? THANKS
Login to reply View 0 answer(s)

14/01/2022

 Acura nader dana (280Pts.)

0

which model fit as remote starter for Acura RL 2010?

Hi As the info on your website, EVO-ONE and EVO-ALL fit ACURA RL 2010 but I prefer EVO-ALL becuse it is cheaper.So please let me know if it is fully functionl as remote starter with orginal fobkey of car (x3 lock). Thank you Nader Dana
Login to reply View 1 answer(s)

19/12/2021

 Acura akmal wahid (130Pts.)

0

evo one compatible with 2001 mdx ?

Fortin EVO-ONE EVO-ONE All-in-One Remote Start, Security & Data Interface compatiblity with acura mdx 2001

Login to reply View 2 answer(s)

14/12/2021

 Acura Armend19 (160Pts.)

0

Alarm going off when I turn off car, Acura RL

I'm using evo-one and a omega OLRF42SST Omegalink 2-way remote, I have a 2005 Acura RL. The alarm is going off whenever I use the remote start the car and then when I turn off the car, the alarm goes off.
Login to reply View 1 answer(s)

13/12/2021

 Acura Armend19 (160Pts.)

0

Flashing key on dash Acura RL

Hello, I'm using evo-one and a omega OLRF42SST Omegalink 2-way remote, I have a 2005 Acura RL. The car starts fine, however, the key light on the dash is flashing whenever I use the remote start. It does not flash if I don't use remote start. Any help is appreciated.
Login to reply View 1 answer(s)

22/11/2021

 Acura peter bowers (130Pts.)

0

remote start no longer functioning, 2013 MDX

2013 MDX auto with navigation option. installed in 2018, REV 20180406,guide #57711. bypass firmware version 73.(26), program remote starater version 38.2, program bypass option C1 The unit was installed in 2018 and had worked fine through winter 2020/2021. With the cold weather of fall 202, tried to use the unit and get no repsonse. recently completed key bypass programming procedure and got to the end and all seemed fine. i have been using the factory remote and the 3x lock feature to operate the remote starter. the hood pin has never been installed. The yellow wire for auto trans is cut. 1x lock-car locks and blue light flashes on module-parking lights flash 2x lock-car locks again and beeper sounds, blue light flashes on module and parking lights flash 3x lock, car locks again and beeper sounds again, blue lights flashes on module, parking lights flash-then the parking lights flash 1 additional time no remote start. Please provide some guidance, thank you.
Login to reply View 1 answer(s)

12/10/2021

 Acura Yuvrajh Singh (210Pts.)

0

Evo one does not enter program mode to program telematics unit.

2020 rdx push to start. Nothing happens after holding the button for 5 sec with ignition on.
Login to reply View 1 answer(s)

16/05/2021

 Acura Luis Sanchez2 (950Pts.)

0

RFK942 not working after disconnecting and reconnecting the car battery

After getting the RFK942 working I did some maintenance on the car. I disconnected the battery to perform the maintenance required and after reconnecting the battery I attempted to lock the doors with the RFK942 remote. The remote sent the signal but doors did not lock (LED turned red). I thought that perhaps the antenna needed to be reprogrammed so I attempted to perform the programming procedure again. The antenna would not program (no blue LED) so I connected it to the Flashlink Manager to see if something had been turned off. The Flashlink Manager did not recognized that the antenna was connected. From this I am gathering that the antenna was damaged when I reconnected the car battery. Is this possible? If so, what can I do to prevent this from happening again? Would a different RF kit work better (for example the RF642W)?
Login to reply View 1 answer(s)

06/04/2021

 Acura Luis Sanchez2 (950Pts.)

0

EVO ONE does not see RFK942

Good day to you. I am having problems programming the RFK942 to the EVO ONE (installed in my 2010 Acura TL with Push-to-Start). When I connected the antenna to the module (using only the antenna cable the RF kit came with) the blue LED on the RF antenna never turned on. After several attempts, I decided to remove the EVO ONE and connect it to my computer (running Windows 10) using the Flashlink Updater (running the latest firmware). The Flashlink Updater could not detect the EVO ONE (and the EVO ONE LEDs never illuminated). I thought that perhaps the Flashlink Updater was inoperative but when I connected an EVO ALL and two RFK942s to the Updater, I discovered that the Updater is functioning properly. I just programmed the EVO ONE a week ago and had no issues then. In fact, the module remote starts the vehicle (Lock 3x on OEM key fob). Any help would be greatly appreciated.
Login to reply View 1 answer(s)

30/03/2021

 Acura Luis Sanchez2 (950Pts.)

0

RF Kit Acura TL

I am installin the RFK942 to my 2010 Acura TL.  Will there be any additional wires that will need to be connected at or to my EVO ONE (besides the cable from the antenna)?  Are there any features that need to be turned on on the Flashlink Updater and if so, where will they be found?  Thank you.

Login to reply View 1 answer(s)

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue